|Warranty:||One Year||Capacity:||100-2000 Kg/h|
|Discharge Motor:||0.75-1.5kw||Blower:||7.5-18.5 Kw|
rice powder mill,
flour making machine
High efficiency grain powder milling machine corn maize flour hammer mill
BSDF advanced hammer mill is our most advanced hammer mill set. It has a good grinding effect for all kinds of spice(such as chilli, turmeric, coriander seeds, etc), of course, for some other materials(like chickpea, cassava, animal feed, seaweed, fertilizer, oyster shell, etc), the grinding effect is also good.
1. Crusher part: It combines coarse crusher,middle fine milling fine milling area(3 milling areas)together.Materials will be ground three times at the same time.
2. Cyclone part: Can seperate dust from powder or granules.
3. Dust collector: According to different material's feature, dryness, fineness etc, we can adjust the pulse time, gap time and also sequence, to get better dust removal effect. The pulse controls the air-hammer beating the outer wall, so that the product will get 100% utilization.
4. Electric control box: Overcurrent protection, sensitive alarm system will effectively protect the machine.
The material enters from the feed port, and is sucked into the coarse crushing area by the negative pressure of the fan for coarse crushing. The coarsely crushed large particles enter the intermediate crushing area for second crushing. The particles after the secondary pulverization are coarsely and finely separated by the classification wheel. The particles that meet the fine crushing enter the fine crushing area for pulverization, and the large particles that do not meet the fine crushing area continue to remain in the middle crushing area and are repulverized. The powder after being crushed in the finely divided area is discharged from the crushing cavity through the negative pressure air flow of the fan through the negative pressure air flow of the fan, enters the cyclone separator, and is discharged through the electric rotary valve at the bottom of the separator.
1)No need screen or sieve in mill chamber, change powder particle size by changing speed;
2)The mill combines 3-stage grinding (coarse crusher, middle fine mill and fine mill) in one mill chamber, which means it can make fine powder directly from big raw material, very effective, and no need to use a coarse crush as a pre-mill.
3) Because it has no screen in mill chamber,while milling, there is almost no heat rising in mill chamber. No need to worry about powder gets stuck in the screens or product quality be affected by the heat from the mill.That's why it is very suitable for grinding heat-sensitive material or material contains fiber or a little oil.
4) It can save more power, its capacity is much bigger than other same motor type traditional mill.
Contact Person: Jewel
Tel: 0086 15961653782