|Product Name:||Porang Grinder||Input Size:||<15mm|
|Capacity:||20-1800 Kg/h||Speed Of Principle Axia(rpm):||-6500|
|Fineness:||60-2500 Mesh||Advantage:||Superfine Final Powder|
|Other Name:||Porang Mill||Other Name:||Porang Crusher|
60 mesh fineness sugar grinder machine,
2500 mesh fineness sugar grinder machine,
15mm industrial sugar grinder
60 To 2500mesh Powder Fineness Uniform Powder Making Porang Grinder
Product introduction:porang grinder
BSP porang grinder (air classifier) is a pulverizer that can produce very fine powder. It is used for crushing sugar, and the output can reach 60 ~ 1000 mesh. Used for grinding dried ginger and turmeric. This type can also be ground into very fine powder. Moreover, the pulverizer can produce very uniform powder, and the distribution of powder is also very uniform.
Technical data:porang grinder
|Speed of principle axia(rpm)||-6500||-5350||-4600||-3100|
|Grading impeller speed(rpm)||4000||4000||3500||3000|
Working method:porang grinder
The material is fed through a screw conveyor into a grinding chamber, where it is cut and ground by rapidly rotating blades. The powder passes through the guide ring into the classification chamber. As the classifier wheel rotates, air and Centrifugal Forces Act simultaneously on the powder. The particles with size larger than the critical diameter (graded size) have larger mass and are thrown back to the grinding chamber to be broken again. Particles smaller than the critical diameter enter the cyclone separator and the dust collector.
1. Compact design and reasonable structure. There is a grading mechanism inside the material, which can carry out grinding and grading at the same time to reduce energy consumption.
2. This machine is equipped with a fan for continuous heat dissipation, which is suitable for grinding heat-sensitive materials.
3. Strong adaptability and narrow particle size distribution. The particle size of the product is uniform, and the fineness can reach 80-320 mesh.
4. In the case of non-stop, the uniform distribution of product particle size can be achieved by adjusting the speed or air classifier.
5. The upper cover of the main unit is opened by a pneumatic spring. The main structure can be opened in both directions to facilitate the cleaning and maintenance of internal components.
6. The main abrasive parts are made of high-grade alloy tool steel, which greatly prolongs the service life or replacement cycle of the worn parts.
7. The bearing system adopts imported high-speed precision bearings, running smoothly, with low vibration and noise.
8. The pipeline has a quick disassembly structure, which is easy to disassemble and clean.
9. Equipped with cyclone separator and dust collector, there is no dust in the production process. The dust bag can effectively collect the fine powder in the airflow, thereby meeting the clean and environmental protection requirements of exhaust gas emission.
10. The fine powder collected in the bag can be effectively recycled. Reduce material wear.
Detailed images:porang grinder
Contact us,we can give you the most appropriate advice
our email: firstname.lastname@example.org
Contact Person: Jewel
Tel: 0086 15961653782